TOOLS
Page 1

We have three pages of tools. Be sure to check them out.
Tools Page 2 | Tools Page 3
If you want some of these items, just fill out a purchase order form.
Main Menu | Purchase Order

Harry's
Wing Bolt
Drilling and Tapping Guide

No More Kiddie Whompas Wing Bolts

Installing wing bolts has always required unrealistically good luck. We recently developed a new procedure that removes most of the guesswork from this difficult task. It uses this steel guide, which measures 1 1/2" round, 3/4" thick and weighs a hefty six ounces. The guide works for 10-32, 10-24 and 1/4-20 bolts. Your wing will be perfectly aligned, and the bolt holes drilled and tapped with the precision a toolmaker would applaud. The guide comes with step-by-step instructions with sixteen photos showing our new wing mounting procedure in complete detail. You can see the better part of those instructions by clicking this sentence.

Catalog Number -  WBG001

JIM'S FILM TRIMMER

Our best selling tool uses inexpensive razor blades and makes perfect lap joints in any plastic film covering. We machine this from solid aluminum bar stock. The film travels in one of the eight slots - which give you eight places to dull the blade. Turn the blade over and you have eight more. Imagine how jealous your friends will be when they find out you trimmed an entire model perfectly with only one inexpensive razor blade. Learn how to make them jealous by clicking here.

Catalog Number - JFT001.

BISO BRASS TUBING BENDERS

This bender makes smooth, kink free bends in 3/32" and 1/8" hard brass fuel line tubing. We have sold more than 25,000. These benders surround the tube to control distortion, which eliminates kinking. You almost have to see it to believe it. Sometimes when things are dull at the Toledo show, with tongue in cheek, we tell the aisle people "More than 153,000 documented bends and not one kink."  Click here for more details.

Catalog Number - BND018.

LeROY'S EASY HINGER

We spared nothing to bring you the safest, easiest-to-use hinging tool and the only one specifically designed for CA hinges. It is machined from aluminum bar stock (no cheap plastic). Modelers who have tried LeRoy's Easy Hinger tell us they would use no other hinge tool combination again. You'll be hinging better than LeRoy in no time.

Catalog Number - HIN001.

Tools Page 2 | Tools Page 3
------------
Main Menu
Tools | Engine Accessories | Books
Purchase Order | Crankshaft Sizes